Number 3 / July 2006

Research Contributions

• Is it Broken?

  Joseph R. Loferski

  377-378

  • PDF

• The Effect of Specific Gravity and Growth Rate on Bending Strength of Finger-Jointed Southern Pine

  Christopher D. Knowles, James D. Stamey, Edward F. Dougal

  379-389

  • PDF

• Variation in Loblolly Pine Cross-Sectional Microfibril Angle With Tree Height and Physiographic Region

  Lewis Jordan, Rechun Re, Daniel B. Hall, Alexander Clark, Richard F. Daniels

  390-398

  • PDF

• Box Compression Analysis of World-Wide Data Spanning 46 Years

  Thomas J. Urbanik, Benjamin Frank

  399-416

  • PDF

• A Method to Measure the Permeability of Dry Fiber Mats

  Patrik Pettersson, T. Staffan Lundström, Tomas Wikström

  417-426

  • PDF

• Fiber Surface Modification by Steam-Explosion: Sorption Studies With Co-Refined Wood and Polyolefins

  Scott Renneckar, Audrey Zink-Sharp, Wolfgang G. Glasser

  427-438

  • PDF

• Statistical Analysis of Influence of Soil Source on Leaching of Arsenic and Copper from CCA-C Treated Wood

  Patricia Lebow, Richard Ziobro, Linda Sites, Tor Schultz, David Pettry, Darrel Nicholas, Stan Lebow, Pascal Kamdem, Roger Fox, Douglas Crawford

  439-449

  • PDF

• Permeability of OSB. Part I. The Effects of Core Fines Content and Mat Density on Transverse Permeability

  Hamid R. Fakhri, Kate E. Semple, Gregory D. Smith

  450-462

  • PDF

• Transverse Permeability of OSB. Part II. Modeling the Effects of Density and Core Fines Content

  Hamid R. Fakhri, Kate E. Semple, Gregory D. Smith

  463-473

  • PDF

• Shrinkage of Three Tropical Hardwoods Below and Above the Fiber Saturation Point

  Roger E. Hernández, Michele Pontin

  474-483

  • PDF

• Modeling Technology Adoption in the Hardwood Sawmill

  Scott A. Bowe, Robert L. Smith

  484-496

  • PDF

• Surface Characterization of Chemically Modified Wood: Dynamic Wettability1

  John Z. Lu, Qinglin Wu

  497-511

  • PDF

• Chemical Composition, Fiber Morphology, and Pulping of P. Bolleana Lauche

  Feng Xu, Xin-Chun Zhong, Run-Cang Sun, Qi Lu, Gwynn Ll Jones

  512-519

  • PDF

• Effect of Density and Polymer Content on the Hygroscopic Thickness Swelling Rate of Compression Molded Wood Fiber/Polymer Composites

  Sheldon Q. Shi, Douglas J. Gardner

  520-526

  • PDF

• Use of Gadolinium Chloride as A Contrast Agent for Imaging Spruce Knots by Magnetic Resonance

  Thomas L. Eberhardt, Chi-Leung So, Amy H. Herlihy, Po-Wah So

  527-534

  • PDF

• Veneer Surface Roughness and Compressibility Pertaining to Plywood/LVL Manufacturing. Part I. Experimentation and Implication

  Brad Jianhe Wang, Chunping Dai, Simon Ellis

  535-545

  • PDF

• Effect of Extended Mat Open Assembly Time on Properties of OSB Bonded With PMDI

  Kate E. Semple, Emmanuel K. Sackey, Hamid R. Fakhri, Trevor McConchie, Gregory D. Smith

  546-552

  • PDF

• Comparison Between Genetic and Environmental Influences on Lumber Bending Properties in Young White Spruce

  Jean Beaulieu, S. Y. Zhang, Qibin Yu, André Rainville

  553-564

  • PDF