Number 2 / April 2003

Research Contributions

• Contributions of Marketing To Wood Science

  Bob Smith, Eric Hansen

  153-154

  • PDF

• Effects of Wood Density And Interlocked Grain on the Shear Strength of Three Amazonian Tropical Hardwoods

  Roger E. Hernández, Giana Almeida

  154-166

  • PDF

• Effects of Wood Fiber Characteristics on Mechanical Properties of Wood/Polypropylene Composites

  Nicole M. Stark, Robert E. Rowlands

  167-174

  • PDF

• Mechanisms Responsible For The Effect of Wet Bulb Depression on Heat Sterilization of Slash Pine Lumber

  William T. Simpson

  175-186

  • PDF

• Effect of Cutting Bill Requirements on Lumber Yield in a Rip-First Rough Mill

  Urs Buehlmann, Janice K. Wiedenbeck, D. Earl Kline

  187-200

  • PDF

• Radial Split Resistance of Chestnut Earlywood and Its Relation to Ring Width

  Patrick Fonti, Juergen Sell

  201-208

  • PDF

• Prevention of Sugi (Cryptomeria Japonica D. Don) from Turning Black by Smoke Heating

  Futoshi Ishiguri, Saori Maruyama, Koetsu Takahashi, Minoru Andoh, Shinso Yokota, Zensaku Abe, Nobuo Yoshizawa

  209-216

  • PDF

• Wood Density and Hydraulic Properties of Ponderosa Pine From the Willamette Valley VS. the Cascade Mountains

  Laurent A. Bouffier, Barbara L. Gartner, Jean-Christophe Domec

  217-233

  • PDF

• Effect of Moisture Content on the Drill Resistance Value in Taiwania Plantation Wood

  Cheng-Jung Lin, Song-Yung Wang, Far-Ching Lin, Chih-Ming Chiu

  234-238

  • PDF

• Transverse Compression Strength and Fracture of Spruce Wood Modified by Melamine-Formaldehyde Impregnation of Cell Walls

  Wolfgang Gindl, Ulrich Müller, Alfred Teischinger

  239-246

  • PDF

• Effect of Low Relative Humidity on Properties of Structural Lumber Products

  David W. Green, James W. Evans

  247-265

  • PDF

• Ultrasonic Plate Wave Evaluation of Natural Fiber Composite Panels

  Brian J. Tucker, Donald A. Bender, David G. Pollock, Michael P. Wolcott

  266-281

  • PDF

• Internal Pressure Measurement Techniques and Pressure Response in Wood During Treating Processes

  Philip F. Schneider, Keith L. Levien, Jeffrey J. Morrell

  282-292

  • PDF

• Influence of Large Deflection on the Measurement of Bending Properties of Veneer by Three-Point Static Bending Tests

  Hiroshi Yoshihara, Atsushi Itoh

  293-300

  • PDF

• Effect of Tree Species on the Devolatilization of Oven-Dry Wood

  Walter P. Walawender, Teresa K. Suazo, Wayne A. Geyer

  301-307

  • PDF

• Orthotropic Strength and Elasticity of Hardwoods in Relation to Composite Manufacture Part III: Orthotropic Elasticity of Structural Veneers

  Elemer M. Lang, Laszlo Bejo, Ferenc Divos, Zsolt Kovacs, R. Bruce Anderson

  308-320

  • PDF