Number 3 / July 2010

Research Contributions

• Charting a Course to a New Wood & Fiber Science

  Jerrold E. Winandy

  257-258

  • PDF

• Magnetic Resonance Microimaging of Liquid Water Distribution in Sugar Maple Wood Below Fiber Saturation Point

  Roger E. Hernández, Claudia B. Cáceres

  259-272

  • PDF

• Effect of Cutting Width and Cutting Height on the Surface Quality of Black Spruce Cants Produced by a Chipper-Canter

  Roger E. Hernández, Svetka Kuljich, Ahmed Koubaa

  273-284

  • PDF

• Montmorillonite Nanoparticle Distribution and Morphology in Melamine-Urea-Formaldehyde Resin-Impregnated Wood Nanocomposites

  Xiaolin Cai, Bernard Riedl, Hui Wan, S. Y. Zhang

  285-291

  • PDF

• Medium-Density Fiberboard Produced Using Pulp and Paper Sludge from Different Pulping Processes

  Sébastien Migneault, Ahmed Koubaa, Hamid Nadji, Bernard Riedl, S. Y. (Tony) Zhang, James Deng

  292-303

  • PDF

• Relation Between Moisture Sorption and Hygroexpansion of Sitka Spruce During Adsorption Processes

  Erni Ma, Tetsuya Nakao, Guangjie Zhao, Hiroshi Ohata, Susumu Kawamura

  304-309

  • PDF

• Mechanical Properties of Genetically Engineered Young Aspen with Modified Lignin Content and/or Structure

  Laszlo Horvath, Ilona Peszlen, Perry Peralta, Bohumil Kasal, Laigeng Li

  310-317

  • PDF

• Acrylate Wood Densification: Effects of Vacuum Time and Nanoparticles on Chemical Retention, Penetration, and Resin Distribution

  Xiaolin Cai, Pierre Blanchet

  318-327

  • PDF

• Real-Time Measurement of the Viscoelasticity of Green Juvenile Wood of Japanese Cedar at High Temperature

  Yoshitaka Kubojima, Youki Suzuki, Mario Tonosaki

  328-334

  • PDF

• Use of Artificial Neural Networks as a Predictive Method to Determine Moisture Resistance of Particle and Fiber Boards Under Cyclic Testing Conditions (UNE-EN 321)

  Luis G. Esteban, Francisco García Fernández, Paloma de Palacios, Beatriz González Rodrigo

  335-345

  • PDF

• Effect of Ambient Pressure on Equilibrium Moisture Content of Wood

  Honghai Liu, Lin Yang, Yingchun Cai, Masatoshi Sugimori, Kazuo Hayashi

  346-351

  • PDF

• Wood I-Joist Model Sensitivity to Oriented Strandboard Web Mechanical Properties

  Jean-Frédéric Grandmont, Alain Cloutier, Guy Gendron, Richard Desjardins

  352-361

  • PDF

• Effect of Pretreatment of Bagasse Pulp on Properties of Isolated Nanofibers and Nanopaper Sheets

  Mohammad L. Hassan, Aji P. Mathew, Enas A. Hassan, Kristiina Oksman

  362-376

  • PDF

• Transverse Compression Behavior of Wood in Saturated Steam at 150-170°C

  Frederick A. Kamke, Andreja Kutnar

  377-387

  • PDF

• Feasibility of Using Mountain Pine Beetle Attacked Wood to Produce Wood-Plastic Composites

  Feng-Cheng Chang, Frank Lam, Karl R. Englund

  388-397

  • PDF

• The Ability of Wood to Buffer Highly Acidic and Alkaline Adhesives

  Xiaodong Wang, Zeen Huang, Paul Cooper, Xiang-Ming Wang, Yaolin Zhang, Romulo Casilla

  398-405

  • PDF

• Technical Note: Analysis of Mechanical Relaxation Intensity of Wood at Various Moisture Contents

  Erni Ma, Tetsuya Nakao, Guangjie Zhao

  406-408

  • PDF

• Technical Note: Characterization of In-Plane Compressive Properties of Plywood by IITRI and End-Loading Compression Tests

  Hiroshi Yoshihara

  409-411

  • PDF

• Technical Note: Effect of Soil on the pH of Treated Wood in Ground Contact

  Tor P. Schultz, Darrel D. Nicholas

  412-416

  • PDF

• Theses and Dissertation Titles

  417-417

  • PDF