Ring Characteristics and Compressive Strength of Japanese Cedar Trees Grown Under Different Silvicultural Treatments

Authors

  • Song-Yung Wang
  • Jin-Hau Chen
  • Kuang-Ping Hsu
  • Cheng-Jung Lin
  • Ming-Chen Jane

Keywords:

Initial spacing, thinning, ring characteristics, compressive strength, dynamic modulus of elasticity

Abstract

The effects of different plantation spacings and thinning treatments on the ring characteristics, compressive strength, and dynamic modulus of elasticity (DMOE) of Japanese cedar (Cryptomeria japonica) trees were investigated. The results revealed that young trees of more-closely spaced plantations (3000 trees/ha) had higher wood density and compressive strength than those of more-widely spaced plantations (2200 trees/ha). Different (first and second) thinning treatments of the 2 initial spacings had little effect on ring characteristics or compressive strength. Overall, the average ring characteristics, compressive strength, and DMOE of 35-yr-old Japanese cedar at different plantation spacings and thinning treatments showed no statistically significant differences. The results suggest that using these silvicultural treatments with a longer rotation age will have no detrimental effects on the wood density, compressive strength, or DMOE.

References

Lei YC, Zhang SY, Jiang Z (2005) Models for predicting lumber bending MOR and MOE based on tree and stand characteristics in black spruce. Wood Sci Technol 39:37-47.nLin CJ, Tsai MJ, Lee CJ, Wang SY, Lin LD (2007) Effects of ring characteristics on the compressive strength and dynamic modulus of elasticity of seven softwood species. Holzforschung 61(3):414-418.nMacdonald E, Hubert J (2002) A review of the effects of silviculture on timber quality of Sitka spruce. Forestry 75:107-138.nMegraw RA, Nearn WT (1972) Detailed DBH density profiles of several trees from Douglas-fir fertilizer/thinning plots, Proceedings of the Symposium, on the Effect of Growth Acceleration on the Properties of Wood. Madison, WI: USDA Forest Service. 22 pp.nBarbour RJ, Fayle DCF, Chauret G, Cook J, Krsh MB, Ran S (1994) Breast-height relative density and radial growth in mature jack pine (Pinus banksiana) for 38 years after thinning. Can J For Res 24:2239-2247.nChuang ST, Wang SY (2001) Evaluation of standing tree quality of Japanese cedar grown with different spacing using stress-wave and ultrasonic-wave methods. J Wood Sci 47(4):245-253.nCown DJ (1973) Effects of severe thinning and pruning treatments on the intrinsic wood properties of young radiata pine. N Z J For Sci 3:379-389.nCown DJ (1974) Comparison of the effects of two thinning regimes on some wood properties of radiata pine. N Z J For Sci 4:540-551.nDutilleul P, Herman M, Avella-Shaw T (1998) Growth rate effects on correlations among ring width, wood density, and mean tracheid length in Norway spruce (Picea abies). Can J For Res 28:56-68.nErickson HD, Harrison AT (1974) Douglas-fir wood quality studies. V. Effects of age and stimulated growth on wood density and anatomy. Wood Sci Technol 8:207-226.nJozsa LA, Brix H (1989) The effects of fertilization and thinning on wood quality of a 24-year-old Douglas-fir stand. Can J For Res 19:1137-1145.nKoga S, Zhang SY (2002) Relationships between wood density and annual growth rate components in balsam fir (Abies balsams). Wood Fiber Sci 34(1):146-157.nKoga S, Begin J (2002) Effects of recommercial thinning on annual radial growth and wood density in balsam fir (Abies balsamea). Wood Fiber Sci 34:625-642.nMoschler WW, Dougal EF, McRae DD (1989) Density and growth ring characteristics of Pinus taeda L. following thinning. Wood Fiber Sci 21:313-319.nNicholls JWP (1971) The effects of environmental factors on wood characteristics. 2. The effect of thinning and fertilizer treatment on the wood of Pinus pinaster. Silvae Genet 20:67-73.nPape R (1999) Effects of thinning regime on the wood properties and stem quality of Picea abies. Scand J For Res 14:38-50.nQMS (1999) QMS tree ring analyzer users guide model QTRS-01X. Knoxville, TN: Quintek Measurement Systems.nTrylor FW, Barton JD (1982) Growth ring characteristics, specific gravity, and fiber length of rapidly grown loblolly pine. Wood Fiber Sci 14:204-210.nWang SY, Chen KN (1992) Effects of plantation spacings on tracheid lengths, annual-ring widths, and percentages of latewood and heartwood of Taiwan-grown Japanese cedar. Mokuzai Gakkaishi 38:645-656.nWang SY, Chiu CM, Lin CJ (2003) Application of the drilling resistance method for annual ring characteristics evaluation of Taiwania (Taiwania cryptomerioides Hay.) trees grown in different thinning and pruning treatments. J Wood Sci 49:116-124.nWang SY, Ko CY (1998) Dynamic of elasticity and bending properties of large beams of Taiwan-grown Japanese cedar from different plantation spacing sites. J Wood Sci 44:62-68.nWang SY, Lin SH (1996) Effects of plantations spacings on the quality of visually graded lumber and mechanical properties of Taiwan-grown Japanese cedar. Mokuzai Gakkaishi 42:435-444.nZobel BJ, van Buijtenen JP (1989) Wood variation its cause and control. Bruhlsche, Berlin, and Heidelberg, Germany: Springer-Verlag. Pp. 218-248.nZobel BJ, Sprague JR (1998) Juvenile wood in forest trees. Berlin and Heidelberg, Germany: Spring-Verlag. Pp. 26-38.n

Downloads

Published

2008-08-01

Issue

Number 3 / July 2008

Section

Research Contributions

License

The copyright of an article published in Wood and Fiber Science is transferred to the Society of Wood Science and Technology (for U. S. Government employees: to the extent transferable), effective if and when the article is accepted for publication. This transfer grants the Society of Wood Science and Technology permission to republish all or any part of the article in any form, e.g., reprints for sale, microfiche, proceedings, etc. However, the authors reserve the following as set forth in the Copyright Law:

1. All proprietary rights other than copyright, such as patent rights.

2. The right to grant or refuse permission to third parties to republish all or part of the article or translations thereof. In the case of whole articles, such third parties must obtain Society of Wood Science and Technology written permission as well. However, the Society may grant rights with respect to Journal issues as a whole.

3. The right to use all or part of this article in future works of their own, such as lectures, press releases, reviews, text books, or reprint books.