Haviarova, Eva
-
Wood and Fiber Science Number 2 / April 2008 - Research Contributions
Analysis, Design, and Performance Testing of a Gate-Leg Table
Abstract PDF -
Wood and Fiber Science Vol. 52 No. 1 (2020) - Editorial Frontmaterial
Eva's President letter
Abstract -
Wood and Fiber Science Number 2 / April 2013 - Research Contributions
Technical Note: Static Versus Cyclic Load Capacity of Side Chairs Constructed with Mortise and Tenon Joints
Abstract PDF -
Wood and Fiber Science Number 4 / October 2011 - Research Contributions
Rectangular Mortise and Full-Width Tenon Joints in Ready-to-Assemble Light-Frame Timber Constructions
Abstract PDF -
Wood and Fiber Science Number 4 / October 2012 - Research Contributions
Effect of Tenon Geometry, Grain Orientation, and Shoulder on Bending Moment Capacity and Moment Rotation Characteristics of Mortise and Tenon Joints
Abstract PDF -
Wood and Fiber Science Number 3 / July 2004 - Research Contributions
Product Engineering and Performance Testing in Relation to Strength Design of Furniture
Abstract PDF -
Wood and Fiber Science Number 1 / January 2010 - Research Contributions
The Effect of end Distance and Number of Ready-to-Assemble Furniture Fasteners on Bending moment Resistance of Corner Joints
Abstract PDF -
Wood and Fiber Science Vol. 49 No. 1 (2017) - Technical Notes
LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR T-SHAPED MORTISE AND TENON JOINTS
Abstract PDF -
Wood and Fiber Science Vol. 49 No. 2 (2017) - Research Contributions
LOWER TOLERANCE LIMIT APPROACH TO EQUATION-BASED RATIONAL DESIGN VALUES FOR L-SHAPED MORTISE AND TENON JOINTS
Abstract PDF -
Wood and Fiber Science Vol. 51 No. 4 (2019) - Research Contributions
Lower Tolerance Limits for Screw Withdrawal in Wood
Abstract -
Wood and Fiber Science Vol. 53 No. 2 (2021) - Research Contributions
EVALUATING DESIGN OF MORTISE AND TENON FURNITURE JOINTS UNDER BENDING LOADS BY LOWER TOLERANCE LIMITS
Abstract PDF -
Wood and Fiber Science Vol. 50 No. 4 (2018) - Research Contributions
Relationship between static and cyclic front to back load capacity of wooden chairs and evaluation of the strength values according to acceptable design values
Abstract PDF
