, China
-
Wood and Fiber Science Vol. 55 No. 1 (2023): Wood and Fiber Science - Research Contributions
IDENTIFICATION AND RECOGNIZATION OF BAMBOO BASED ON CROSS-SECTIONAL IMAGES USING COMPUTER VISION
Abstract pdf -
Wood and Fiber Science Vol. 48 No. 1 (2016) - Research Contributions
LOAD-DEFLECTION BEHAVIOR OF RATTAN CHAIR SEATS
Abstract PDF -
Wood and Fiber Science Vol. 49 No. 1 (2017) - Research Contributions
CHEMICAL CONSTITUENT DISTRIBUTION WITHIN MULTILAYERED CELL WALLS OF MOSO BAMBOO FIBER TESTED BY CONFOCAL RAMAN MICROSCOPY
Abstract PDF -
Wood and Fiber Science Vol. 48 No. 4 (2016) - Research Contributions
MECHANICAL PROPERTIES OF SILICA CELLS IN BAMBOO MEASURED USING IN-SITU IMAGING NANAINDENTATION
Abstract PDF -
Wood and Fiber Science Vol. 47 No. 3 (2015) - Research Contributions
OPTIMIZING PREPARATION CONDITIONS OF ULTRA-LOW-DENSITY FIBERBOARD BY RESPONSE SURFACE METHODOLOGY
Abstract PDF -
Wood and Fiber Science Vol. 47 No. 4 (2015) - Research Contributions
SHEARING BEHAVIOR OF STRUCTURAL INSULATED PANEL WALL SHELLED WITH BAMBOO SCRIMBER
Abstract PDF -
Wood and Fiber Science Vol. 49 No. 2 (2017) - Research Contributions
Combustibility of Boron-Containing Fire Retardant Treated Bamboo Filaments
Abstract PDF -
Wood and Fiber Science Vol. 49 No. 1 (2017) - Research Contributions
INVESTIGATING CHEMICAL PROPERTIES AND COMBUSTION CHARACTERISTICS OF TORREFIED MASSON PINE
Abstract PDF -
Wood and Fiber Science Vol. 49 No. 2 (2017) - Research Contributions
DEVELOPING A RAPID TEST METHOD FOR MEASURING VOLATILE ORGANIC COMPOUNDS FROM THREE-LAYER PARQUET WITH MICROCHAMBER
Abstract PDF -
Wood and Fiber Science Vol. 49 No. 3 (2017) - Research Contributions
INVESTIGATING SYNERGISTIC INTERACTION OF BAMBOO AND TORREFIED BAMBOO WITH COAL DURING COCOMBUSTION
Abstract PDF -
Wood and Fiber Science Vol. 49 No. 3 (2017) - Research Contributions
INVESTIGATING GASEOUS CARBON, NITROGEN, AND SULFUR COMPOUNDS OF BAMBOO, WOOD, AND COAL DURING PYROLYSIS PROCESS
Abstract PDF -
Wood and Fiber Science Vol. 49 No. 3 (2017) - Research Contributions
MECHANO-SORPTIVE CREEP MECHANISM OF BAMBOO-BASED PRODUCTS IN BENDING
Abstract PDF -
Wood and Fiber Science Vol. 50 No. 1 (2018) - Research Contributions
EXPERIMENTAL STUDY OF THE BENDING PERFORMANCE OF HOLLOW GLULAM BEAMS
Abstract PDF -
Wood and Fiber Science Vol. 49 No. 4 (2017) - Research Contributions
Predicting of cutting force during gypsum fiber composite milling process using response surface methodology
Abstract PDF -
Wood and Fiber Science Vol. 50 No. 2 (2018) - Research Contributions
FINITE ELEMENT ANALYSIS OF TENSILE LOAD RESISTANCE OF MORTISE-AND-TENON JOINTS CONSIDERING TENON FIT EFFECTS
Abstract PDF -
Wood and Fiber Science Vol. 50 No. 1 (2018) - Research Contributions
Pyrolysis kinetics of moso bamboo
Abstract PDF -
Wood and Fiber Science Vol. 50 No. 1 (2018) - Research Contributions
Preparation and application of high performance corn starch glue in straw decorative panel
Abstract PDF -
Wood and Fiber Science Vol. 50 No. 2 (2018) - Research Contributions
EFFECT OF PANEL AREA-VOLUME RATIO ON TVOC RELEASED FROM DECORATIVE PARTICLEBOARDS
Abstract PDF -
Wood and Fiber Science Vol. 50 No. 4 (2018) - Research Contributions
FABRICATION AND CHARACTERIZATION OF NANO-FE/WOODCERAMIC COMPOSITES
Abstract PDF -
Wood and Fiber Science Vol. 50 No. 4 (2018) - Research Contributions
INVESTIGATION OF DECAY RESISTANCE OF ALKALINE COPPER, UREA-FORMALDEHYDE, AND PHENOL -FORMALDEHYDE RESINS
Abstract PDF -
Wood and Fiber Science Vol. 50 No. 3 (2018) - Research Contributions
EFFECTS OF COMPATIBILIZERS ON SELECTED PROPERTIES OF HDPE COMPOSITES HIGHLY FILLED WITH BAMBOO FLOUR
Abstract PDF -
Wood and Fiber Science Vol. 50 No. 2 (2018) - Research Contributions
OPTIMIZATION FOR THE LIQUEFACTION OF MOSO BAMBOO IN PHENOL USING RESPONSE SURFACE METHODOLOGY
Abstract PDF -
Wood and Fiber Science Vol. 50 No. 3 (2018) - Research Contributions
DEFECT DETECTION AND QUALITY ASSESSMENT OF HARDWOOD LOGS: PART 1—ACOUSTIC IMPACT TEST AND WAVELET ANALYSIS
Abstract PDF -
Wood and Fiber Science Vol. 50 No. 3 (2018) - Research Contributions
AN ANALYSIS OF HEATING UNIFORMITY IN WOOD HIGH-FREQUENCY DRYING
Abstract PDF -
Wood and Fiber Science Vol. 50 No. 4 (2018) - Research Contributions
The Effect of Culm Age, Height, Node and Adhesive on the Properties of Bamboo Oriented Strand Boards
Abstract PDF -
Wood and Fiber Science Vol. 51 No. 1 (2019) - Research Contributions
Effect of Supercritical Carbon Dioxide Treatment on Gas Permeability of Paulownia Fortunei Heartwood and Sapwood
Abstract PDF -
Wood and Fiber Science Vol. 50 No. 4 (2018) - Research Contributions
Influence of Four Coatings on the Mold-Resistance and Combustion Performance of Decorative Bamboo Curtain
Abstract PDF -
Wood and Fiber Science Vol. 51 No. 4 (2019) - Research Contributions
IMPROVEMENT SCHEME AND VERIFICATION OF HIGH-FREQUENCY HEATING UNIFORMITY OF WOOD
Abstract -
Wood and Fiber Science Vol. 51 No. 3 (2019) - Research Contributions
RBF based sliding mode control method for lumber drying system
Abstract PDF -
Wood and Fiber Science Vol. 51 No. 4 (2019) - Research Contributions
Determination of Effective Coefficient of Chinese Fir (Cunninghamia Lanceolata) During Adsorption and Desorption Process
Abstract -
Wood and Fiber Science Vol. 52 No. 1 (2020) - Research Contributions
Influence of cotton fiber properties on the microstructural characteristics of mercerized fibers by regression analysis
Abstract -
Wood and Fiber Science Vol. 51 No. 3 (2019) - Research Contributions
Physical and Chemical Characterization of Chinese Fallen Poplar Leaf Ash: Effects of the Calcining Temperature and Aqueous Solution
Abstract -
Wood and Fiber Science Vol. 51 No. 3 (2019) - Research Contributions
EXPERIMENTAL RESEARCH ON MECHANICAL PROPERTIES OF LAMINATED POPLAR WOOD VENEER/PLASTIC SHEET COMPOSITES
Abstract -
Wood and Fiber Science Vol. 51 No. 3 (2019) - Research Contributions
Study on the Swelling Characteristics of Bamboo Based on Its Graded Hierarchical Structure
Abstract -
Wood and Fiber Science Vol. 52 No. 1 (2020) - Research Contributions
Acoustic wave propagation in standing trees - Part 1. Numerical simulation
Abstract -
Wood and Fiber Science Vol. 52 No. 1 (2020) - Research Contributions
Ground-Penetrating Radar Investigation of Salvaged Timber Girders from Bridges Along Route 66 in California
Abstract -
Wood and Fiber Science Vol. 52 No. 2 (2020) - Research Contributions
AN EXPERIMENTAL STUDY ON FLEXURAL BEHAVIOR OF GLULAM BEAMS MADE OUT OF THERMALLY TREATED FAST-GROWING POPLAR LAMINAE
Abstract -
Wood and Fiber Science Vol. 52 No. 1 (2020) - Research Contributions
Fiber Morphology, Chemical Composition, and Pulping of Nine Introduced Poplar Clones Grown in Beijing, China
Abstract -
Wood and Fiber Science Vol. 53 No. 2 (2021) - Research Contributions
ACOUSTIC WAVE PROPAGATION IN STANDING TREES —PART II. EFFECTS OF TREE DIAMETER AND JUVENILE WOOD
Abstract PDF -
Wood and Fiber Science Vol. 53 No. 3 (2021) - Research Contributions
MANUFACTURING AND INTERFACIAL BONDING BEHAVIOR OF EVA FILM REINFORCED FLEXIBLE DECORATIVE VENEER
Abstract PDF -
Wood and Fiber Science Vol. 53 No. 4 (2021): Wood and Fiber Science - Research Contributions
A MULTISCALE STUDY ON THE ELASTIC PROPERTIES OF BAMBOO
Abstract -
Wood and Fiber Science Vol. 47 No. 3 (2015) - Research Contributions
THE INFLUENCE OF NANOCELLULOSE AND SILICON DIOXIDE ON THE MECHANICAL PROPERTIES OF THE CELL WALL WITH RELATION TO THE BOND INTERFACE BETWEEN WOOD AND UREA-FORMALDEHYDE RESIN
Abstract PDF -
Wood and Fiber Science Vol. 48 No. 3 (2016) - Research Contributions
AN INVESTIGATION ON WINDMILL PALM LEAF SHEATH FIBER POWDER-BASED ACTIVATED CARBON FOR DYE ADSORPTION
Abstract PDF -
Wood and Fiber Science Vol. 47 No. 4 (2015) - Research Contributions
COMPRESSIVE CREEP AND RECOVERY BEHAVIORS OF SEAT CUSHIONS IN UPHOLSTERED FURNITURE
Abstract PDF -
Wood and Fiber Science Vol. 49 No. 3 (2017) - Research Contributions
HUMAN AND TEST BAG IMPACT LOADS ON STATIONARY SEATING
Abstract PDF -
Wood and Fiber Science Vol. 54 No. 3 (2022): Wood and Fiber Science - Research Contributions
A CHARACTERIZATION AND ANALYSIS OF VERY VOLATILE ORGANIC COMPOUNDS AND ODORS FROM MEDIUM DENSITY FIBERBAORD COATED WITH DIFFERENT LACQUERS USING GAS CHROMATOGRAPHY COUPLED WITH MASS SPECTROMETRY AND OLFACTOMETRY
Abstract pdf -
Wood and Fiber Science Vol. 47 No. 4 (2015) - Research Contributions
INFLUENCE OF ENVIRONMENTAL CONDITIONS ON RELEASE RULES OF FERTILIZER FROM WOOD RESIDUE SLOW-RELEASE FERTILIZER SHELL
Abstract PDF -
Wood and Fiber Science Vol. 50 No. 1 (2018) - Research Contributions
Performance of thermally modified Scots pine treated with combinations of some modifying chemicals
Abstract PDF -
Wood and Fiber Science Vol. 52 No. 2 (2020) - Research Contributions
Effect of Wood Species on the Pore Volume and Surface Area of Activated Carbon Derived From the Self Activation Process
Abstract -
Wood and Fiber Science Vol. 53 No. 1 (2021) - Research Contributions
PREPARATION AND CHARACTERIZATION OF CELLULOSE FILMS FROM FICUS NATALENSIS BARK CLOTH FIBERS
Abstract -
Wood and Fiber Science Vol. 47 No. 4 (2015) - Research Contributions
EQUILIBRIUM MOISTURE CONTENT UNDER VACUUM CONDITIONS
Abstract PDF -
Wood and Fiber Science Vol. 52 No. 4 (2020) - Research Contributions
INDENTATION COEFFICIENT AND INDENTATION BEHAVIOR OF BAMBOO
Abstract -
Wood and Fiber Science Vol 50 (Special Issue - CLT/Mass Timber) (2018) - Research Contributions
SEISMIC DESIGN OF CROSS-LAMINATED TIMBER BUILDINGS
Abstract PDF