Effect of Steaming on Some Physical and Chemical Properties of Black Walnut Heartwood

Authors

  • Peter Y. S. Chen
  • Edward C. Workman

Keywords:

Hygroscopicity, permeability, transmittance, mechanical strength properties, dimensional stability, hydrolytic processes, Juglans nigra

Abstract

The influence of steaming time and temperature on some physical and chemical properties of black walnut heartwood was studied. One-inch cube sample blocks were steamed at two different temperatures and four different times, and the pH, surface tension, and color of the wood fluids, as well as the extractives and area of cell lumina, were determined.

The pH and surface tension were not affected enough by steaming to be related to color changes of wood, swelling the wood beyond that normally expected in water at room temperature, or reducing drying defects. Prolonged and high temperature (above 100 C) steaming increased alcohol-benzene extractives of the steamed wood. Prolonged and high temperature steaming caused cell walls to swell beyond that in water at room temperature, especially in earlywood. Steaming temperature and time were highly effective in changing the color of wood fluids.

References

Barrett, J. P., and J. S. Philbrook. 1970. Dot grid area estimates: Precision by repeated trials. J. For. 68(3):149-151.nBrauner, A. B., and E. M. Conway. 1964. Steaming walnut for color. For. Prod. J. 14(11):525-527.nCech, M. Y. 1968. Effect of alcohol in preventing collapse under extreme drying conditions. For. Prod. J. 18(6):35-42.nChen, P. Y. S. 1975. The effect of steaming time and temperature on the longitudinal permeability of black walnut. Wood Fiber 7(3):222-225.nCooper, G. A. 1974. The effect of black walnut extractives on sorption, shrinkage, and swelling. Wood Sci. 6(4):380-388.nEllwood, E. L., B. A. Ecklund, and E. Zavarin. 1960. Collapse in wood—exploratory experiments in its prevention. For. Prod. J. 10(1):8-21.nKai, Y. 1975. Color of wood. Wood industry (Japanese) 30(7):291-294.nKubinsky, E., and G. Ifju. 1973a. A simple and fast method of pH measurement for wood. For. Prod. J. 23(2):54-56.nKubinsky, E., and G. Ifju. 1973b. Influence of steaming on the properties of red oak. Part I. Structural and chemical changes. Wood Sci. 6(1):87-94.nStamm, A. J. 1964. Wood and cellulose science. The Ronald Press Co., New York. P. 249.nTorgeson, O. W., and H. H. Smith. 1942. Experimental kiln runs on black walnut gunstock blanks. U.S. Dep. Agric. For. Serv. FPL-R-1401.nTroughton, G. E., and L. R. Rozon. 1974. Heat effects on tensile properties of Douglas-fir and white spruce thin sections. Wood Sci. 7(2):116-122.nUSDA Forest Products Laboratory. 1961. Steaming black walnut lumber to darken the sap-wood. Report R1673, Madison, Wisconsin.n

Downloads

Published

2007-06-27

Issue

Number 4 / Winter 1980

Section

Research Contributions

License

The copyright of an article published in Wood and Fiber Science is transferred to the Society of Wood Science and Technology (for U. S. Government employees: to the extent transferable), effective if and when the article is accepted for publication. This transfer grants the Society of Wood Science and Technology permission to republish all or any part of the article in any form, e.g., reprints for sale, microfiche, proceedings, etc. However, the authors reserve the following as set forth in the Copyright Law:

1. All proprietary rights other than copyright, such as patent rights.

2. The right to grant or refuse permission to third parties to republish all or part of the article or translations thereof. In the case of whole articles, such third parties must obtain Society of Wood Science and Technology written permission as well. However, the Society may grant rights with respect to Journal issues as a whole.

3. The right to use all or part of this article in future works of their own, such as lectures, press releases, reviews, text books, or reprint books.