The Effect of Log Rotation On Value Recovery In Chip And Saw Sawmills

Authors

  • Thomas C. Maness
  • W. Stuart Donald

Keywords:

Sawmilling, sawing optimization, lumber manufacturing, computer-aided manufacturing

Abstract

Advances in three-dimensional scanning techniques and computer optimization permit real time solution and implementation of optimal log rotation before it is fed into the chipper heads. A random sample of 834 S-P-F logs from the interior of British Columbia were examined using simulation to determine the effects of log rotation strategies on value recovery for a small log Chip and Saw. Both log sweep and cross-sectional eccentricity are shown to cause significant reductions in value recovery. Eight rotation placements from 0° to 315° were studied to determine if a single rotational placement could be found that performs best. On average, the "horns up" position (0° rotation) was found to significantly outperform all others in maximizing value recovery. The ability to rotate each log into the optimal position produced significant benefits. The benefits were more highly related to the degree of cross-sectional eccentricity present in the log rather than the degree of sweep present in the log.

References

Anonymous. 1992. Random lengths—Lumber price guide. 10 January, 1992. Random Lengths Publications, Eugene, OR.nHallock, H., and D. W. Lewis. 1971. Increasing softwood dimension yield from small logs—Best opening face. USDA Forest Serv. Res. Paper FPL 166. Madison, WI.nHasenwinkle, E. D., F. Wislocker, and C. Blickenderfer. 1987. Variable curve linebar. U.S. Patent, 4,633,924. U.S. Patent Office, Washington, D.C.nH. A. Leach and Company Ltd. 1990. SAWSIM. Users guide. Howard A. Leach, Ltd., Vancouver, BC.nLindstrom, N. E. 1979. Apparatus for curved sawing of timber. U.S. Patent 4,144,782. U.S. Patent Office, Washington, D.C.nMongeau, J. P., R. Beauregard, and T. E. G. Harless. 1993. Softwood log shape modeling with shadow scanners. Wood Fiber Sci. 25(3):261-277.nNeter, J., W. Wasserman, and M. H. Kutner. 1990. Applied linear statistical models: Regression, analysis of variance, and experimental design. Richard D. Irwin, Inc., Boston, MA.nSAS Institute. 1991. User's guide: Statistics. SAS Institute, Gary, NC.nShi, R., P. H. Steele, and F. G. Wagner. 1990. Influence of log length and taper on estimation of hardwood BOF position. Wood Fiber Sci. 22(2):142-148.nSteele, P. H., E. M. Wengert, and K. Little. 1987. Simplified procedure for computing best opening face position. Forest Prod. J. 37(5):44-48.nWang, S. J., B. D. Munro, D. R. Giles, and D. M. Wright. 1992. Curve sawing performance evaluation. Forest Prod. J. 42(1):15-20.nWilliston, E. M. 1981. Small log sawmills. Miller-Freeman Publications, Inc., San Francisco, CA.n

Downloads

Published

2007-06-25

Issue

Number 4 / October 1994

Section

Research Contributions

License

The copyright of an article published in Wood and Fiber Science is transferred to the Society of Wood Science and Technology (for U. S. Government employees: to the extent transferable), effective if and when the article is accepted for publication. This transfer grants the Society of Wood Science and Technology permission to republish all or any part of the article in any form, e.g., reprints for sale, microfiche, proceedings, etc. However, the authors reserve the following as set forth in the Copyright Law:

1. All proprietary rights other than copyright, such as patent rights.

2. The right to grant or refuse permission to third parties to republish all or part of the article or translations thereof. In the case of whole articles, such third parties must obtain Society of Wood Science and Technology written permission as well. However, the Society may grant rights with respect to Journal issues as a whole.

3. The right to use all or part of this article in future works of their own, such as lectures, press releases, reviews, text books, or reprint books.