Development and Composition of the Warty Layer in Balsam Fir. II. Composition
Keywords:
<i>Abies balsamea</i>, warts, softwoods, extraction, fungi, enzymes, chemical treatment, lignins, cell structure, cell walls, drying, delignificationAbstract
From its response to various chemical, physical, fungal, and enzymatic treatments, it was concluded that the warty layer in balsam fir consisted largely of a ligninlike material that was visibly more resistant to extraction than a large fraction of other lignin in the fiber cell wall. Since the warts were the cell-wall component most accessible to the treatment solutions, it is probable that the material in the warty layer was more concentrated and condensed than lignin in other parts of the wall. Vacuum drying at 105 C appeared to condense the wart structure still further, making it even more resistant to most treatments. Gel filtration indicated that the warty layer was extracted as a high molecular weight material by certain treatments. The warty layer may act as a barrier that slows the penetration of liquids into the cell wall and thereby may cause different rates of delignification for different wood species. The basal component of individual warts and some of the accompanying encrustant on the inner surface of the cell wall were found to contain an amorphous carbohydrate, probably a pentosan or a pectic substance. Attempts at physical isolation of the warts were largely unsuccessful.References
Atack, D. 1972. On the characterization of pressurized refiner mechanical pulps. Sven. Papperstidn. 75:89-94.nBaird, W. M. 1974. Development and composition of the warty layer in balsam fir [Abies balsamea (L.) Mill.]. Doctoral Dissertation, The Institute of Paper Chemistry, Appleton, WI.nBaird, W. M., R. A. Parham, and M. A. Johnson. 1974. Development and composition of the warty layer in balsam fir. Part I. Development. Wood Fiber 6(2):114-125.nBartnicki-Garcia, S. 1966. Chemistry of hyphal walls of Phytophthora.J. Gen. Microbiol. 42:57-69.nBerenzon, M. F., and B. D. Bogomolov. 1970. Study of the delignification process during alkaline cooks by electron microscopy. (In Russian.) Tr. Arkangelsk. Lesotekn. 23:105-109; Ref. Zh., Khim. (5):A5420.nBland, D. E. 1949. Separation of vanillin and syringaldehyde by paper partition chromatography. Nature 164:1093.nBrauns, F. E. 1952. The chemistry of lignin. Academic Press, New York.nCôté, W. A., Jr. 1972. The ultrastructural organization of wood and wood fibers. Pages 1-18 in D. H. Page, ed. The physics and chemistry of wood pulp fibers. Tappi, New York.nCôté, W. A., Jr., and A. C. Day. 1962. Vestured pits-fine structure and apparent relationship with warts. Tappi 45:906-910.nCôté, W. A., Jr., T. E. Timell, and R. A. Zabel. 1966. Distribution of lignin in compression wood of red spruce (Picea rubens Sarg.). Holz Roh-Werkst. 24:432-438.nDunning, C. E. 1969. The structure of longleaf pine latewood. I. Cell-wall morphology and the effect of alkaline extraction. Tappi 52:1326-1335.nGoring, D. A. I. 1963. Thermal softening of lignin, hemicellulose, and cellulose. Pulp Pap. Mag. Can. 64:T517-527.nHenley, D. 1961. A macromolecular study of cellulose in "Cadoxen." Arkiv. Kemi 18:327-392.nHough, L., J. K. N. Jones, and W. H. Wadman. 1950. Quantitative analysis of mixtures of sugars by the method of partition chromatography. Part V. Improved methods for the separation and detection of the sugars and their methylated derivatives on the paper chromatogram. J. Chem. Soc. 1950:1702-1706.nJayme, G., and F. K. Azzola. 1966. Chemical resistance of the warty layer of wood fibers. (In German.) Holzforschung 20:101-103.nJohnson, D. L. U.S. pat. 3,447,939 (June 3, 1969).nLeopold, B. 1961. Chemical composition and physical properties of wood fibers. I. Preparation of holocellulose fibers from loblolly pinewood. Tappi 44:230-232.nLiese, W. 1965. The warty layer. Pages 251-269 in W. A. Côté, ed. Cellular ultrastructure of woody plants. Syracuse Univ. Press, Syracuse, N. Y.nLiese, W. 1970. Ultrastructural aspects of woody tissue disintegration. Ann. Rev. Phytopathol. 8:231-258.nLiese, W., and R. Schmid. 1962. Electron microscope research on the decomposition of wood by fungi. (In German.) Angew. Bot. 36:291-298.nLundquist, K., and B. Wesslen. 1971. Gel filtration of lignin model compounds. Acta Chem. Scand. 25:1920-1922.nMeier, H. 1964. General chemistry of cell walls and distribution of the chemical constituents across the walls. Pages 137-151 in M. H. Zimmermann, ed. The formation of wood in forest trees. Academic Press, New York.nPearl, I. A., and P. R. McCoy. 1960. Stable diazo salts for chromatographic spray reagents. Anal. Chem. 32:1407-1410.nScurfield, G., and S. R. Silva. 1969. The structure of reaction wood as indicated by scanning electron microscopy. Aust. J. Bot. 17:391-402.nScurfield, G., and S. R. Silva. 1970. The vestured pits of Eucalyptus regnans F. Muell: a study using scanning electron microscopy. Bot. J. Linn. Soc. 63:313-320.nThompson, N. S., and O. A. Kaustinen. 1964. Some chemical and physical properties of pulps prepared by mild oxidative action. Tappi 47:157-162.nTimell, T. E. 1962. Enzymatic hydrolysis of a 4-O-methylglucuronoxylan from the wood of white birch. Sven. Papperstidn. 65:435-437.nTsoumis, G. 1965. Electron microscopic observations relate the warty layer to extractives in wood. Tappi 48:451-454.nWaldt, D. 1965. Spray reagents for thin-layer chromatography. Pages 483-502 in E. Stahl, ed. Thin-layer chromatography. Academic Press, New York.nWardrop, A. B., W. Liese, and G. W. Davies. 1959. The nature of the wart structure in conifer tracheids. Holzforschung 13:115-120.n
Downloads
Published
Issue
Section
License
The copyright of an article published in Wood and Fiber Science is transferred to the Society of Wood Science and Technology (for U. S. Government employees: to the extent transferable), effective if and when the article is accepted for publication. This transfer grants the Society of Wood Science and Technology permission to republish all or any part of the article in any form, e.g., reprints for sale, microfiche, proceedings, etc. However, the authors reserve the following as set forth in the Copyright Law:
1. All proprietary rights other than copyright, such as patent rights.
2. The right to grant or refuse permission to third parties to republish all or part of the article or translations thereof. In the case of whole articles, such third parties must obtain Society of Wood Science and Technology written permission as well. However, the Society may grant rights with respect to Journal issues as a whole.
3. The right to use all or part of this article in future works of their own, such as lectures, press releases, reviews, text books, or reprint books.