The Length of Phloem Fibers in Sweetgum (<i>Liquidambar Styraciflua</i> L.): A Research Note
References
American Society for Testing and Materials. 1972. Standard methods of evaluating the properties of wood-base fiber and particle panel materials. Designation D-1037-72a.nBeall, F. C., W. J. Young, and A. E. Witt. 1975. Improvement of physical properties of aspen flakeboard by polymer introduction. Wood Sci. 7(3):213-218.nBrown, T. D. 1975. Modeling of strength and physical properties of structural-type particleboard. Ph.D. Dissertation, Colorado State University, Fort Collins, Colo.nBrumbaugh, J. 1960. Effect of flake dimension on properties of particleboard. For. Prod. J. 10(5):243-246.nBryan, E. 1962. Maximum strength properties of particleboard. For. Prod. J. 12(2):59-64.nGoodman, J. R., M. D. Vanderbilt, M. E. Criswell, and J. Bodig. 1974. Composite and two-way action in wood joist floor systems. Wood Sci. 7(1):25-33.nHofstrand, A. D. 1958. Relationship of specific gravity to moduli of rupture and elasticity in commercial hardboard. For. Prod. J. 8(6):177-180.nHse, C. Y., P. Koch, C. McMillin, and E. Price, 1975. Laboratory scale development of a structural exterior flakeboard from hardwoods growing on southern pine sites. For. Prod. J. 25(4):42-50.nHunt, M. O., and S. K. Suddarth, 1974. Prediction of elastic constants of particleboard. For. Prod. J. 24(5):52-57.nJayne, B. A. (Editor.) 1972. Theory and design of wood and fiber composite materials. Syracuse University Press, Syracuse, N.Y.nLehman, W. F. 1970. Resin efficiency in particleboard as influenced by density, atomization, and resin content. For. Prod. J. 20(11):48-54.nLehman, W. F., and F. V. Hefty, 1973. Resin efficiency and dimensional stability of flakeboards. U.S. For. Prod. Lab. Res. Pap. FPL 203.nLundgren, A. 1957. Hardboard as construction material—A viscoelastic substance. Holz Roh-Werkst. 15(1):19-23.nMaloney, T. M. 1970. Resin distribution in layered particleboard. For. Prod. J. 20(1):43-52.nMcNatt, J. D. 1970. Design stresses for hardboard—effect of rate, duration and repeated loading. For. Prod. J. 20(1):53-60.nNelson, N. D. 1973. Effects of wood and pulp properties on medium density, dry-formed hardboard. For. Prod. J. 23(9):72-80.nPearson, R. G. 1977. An interim industry standard for deriving allowable unit values for structural partcleboard in bending. Pages 333-350 in Proc. Eleventh Particleboard Symposium, Washington State University, Pullman, WA.nPlath, E. 1971. A contribution on particleboard mechanics. Holz Roh- Werkst. 29(10):377-382.nPlath, E., and E. Schnitzler, 1974. The density profile—A criterion for evaluating particleboard. Holz Roh- Werkst. 32(11):443-449.nPolensek, A., and G. H. Atherton, 1976. Compression-bending strength and stiffness of walls with utility grade studs. For. Prod. J. 26(11):17-25.nPost, P. W. 1961. Relation of flake size and resin content to mechanical and dimensional properties of flakeboard. For. Prod. J. 11(1):34-37.nStrickler, M. D. 1959. Effect of press cycles and moisture content on properties of Douglas-fir flakeboard For. Prod. J. 9(7):203-215.nSuchsland, O., and G. E. Woodson. 1976. Properties of medium-density fiberboard produced in oil-heated laboratory press. Southern For. Exp. Sta. Res. Pap. SO-116.nSuperfesky, M. J., and T. J. Ramaker. 1976. Hardboard-webbed I-beams subjected to short-term loading. U.S. For. Prod. Lab. Res. Pap. FPL 264.nTalbott, J. W. 1974. Electrically aligned particleboard and fiberboard. Pages 153-182 in Proceedings of Eighth Particleboard Symposium. Washington State University, Pullman.nTalbott, J. W., and E. K. Stefanakos. 1972. Aligning forces on wood particles in an electric field. Wood Fiber 4(3):193-203.nWoodson, G. E. 1976. Effect of bark, density profile, and resin content on medium-density fiberboards from southern hardwoods. For. Prod. J. 26(2):39-42.nWoodson, G. E. 1977. Density profile and fiber alignment in fiberboard from three southern hardwoods. For. Prod. J. 27(8):29-34.n
Downloads
Published
Issue
Section
License
The copyright of an article published in Wood and Fiber Science is transferred to the Society of Wood Science and Technology (for U. S. Government employees: to the extent transferable), effective if and when the article is accepted for publication. This transfer grants the Society of Wood Science and Technology permission to republish all or any part of the article in any form, e.g., reprints for sale, microfiche, proceedings, etc. However, the authors reserve the following as set forth in the Copyright Law:
1. All proprietary rights other than copyright, such as patent rights.
2. The right to grant or refuse permission to third parties to republish all or part of the article or translations thereof. In the case of whole articles, such third parties must obtain Society of Wood Science and Technology written permission as well. However, the Society may grant rights with respect to Journal issues as a whole.
3. The right to use all or part of this article in future works of their own, such as lectures, press releases, reviews, text books, or reprint books.
