Open Access Open Access  Restricted Access Subscription or Fee Access

A Method to Characterize Biological Degradation of Mass Timber Connections

Arijit Sinha, Kenneth E. Udele, Jed Cappellazzi, Jeff J Morrell

Abstract


Biological durability issues in cross-laminated timber (CLT) have been majorly ignored in North America because of the European origin of the material and careful construction practices in Europe.  However, the risks of fungal and insect attacks are increased by the North American climatic conditions and lack of job-site measures to keep the material dry. The methods to evaluate durability in solid timber are inadequate for use in mass timber (MT) for a number of reasons, such as moisture variation and size being critical issues. This study therefore proposes a method, which is suitable to evaluate the strength of MT assemblies that are exposed to fungal degradation. The objective of the study was to explore a controlled method for assessing the effects of wetting and subsequent fungal attack on the behavior of CLT connections. Two different methods were used to create fungal attack on CLT assemblies. Although they were both successful, one was cumbersome, left room for many errors, and was not as efficient as the other. In addition, a standardized method to evaluate and characterize key performance metric for the connections is presented.

 


Keywords


Biological Durability; Fungi; CLT Connections; connection strength

Full Text:

PDF

References


ASTM (2018) D5764. Test method for evaluating dowel bearing strength of wood and wood-based products. ASTM. doi: 10.1520/D5764-97AR18.

Barber D (2018) Fire safety of mass timber buildings with CLT in USA. Wood Fiber Sci 50(Special Issue):83-95.

Barbosa AR, Rodrigues L, Sinha A, Higgins C, Zimmerman RB, Breneman S, Pei S, van de Lindt JW, Berman J, McDonnell E, Branco JM, Neves LC (2018) Numerical modelling of CLT diaphragms tested on a shake-table experiment. https://nottingham-repository.worktribe.com/output/1588914/numerical-modelling-of-clt-diaphragmstested-on-a-shake-table-experiment.

Blomgren H, Pei S, Jin Z, Powers J, Dolan JD, van de Lindt JW, Barbosa AR, Huang D (2019) Full-scale shake table testing of cross-laminated timber rocking shear walls with replaceable components. J Struct Eng 145(10):04019115.

Bolvardi V, Pei S, van de Lindt JW, Dolan JD (2018) Direct displacement design of tall cross laminated timber platform buildings with inter-story isolation. Eng Struct 167:740-749.

Brandner R, Flatscher G, Ringhofer A, Schickhofer G, Thiel A (2016) Cross laminated timber (CLT): Overview and development. Eur J Wood Wood Prod 74(3):331-351.

Cappellazzi J, Konkler MJ, Sinha A, Morrell JJ (2020) Potential for decay in mass timber elements: A review of the risks and identifying possible solutions. Wood Mater Sci Eng 1-10.

Curling S, Clausen CA, Winandy JE (2001) The effect of hemicellulose degradation on the mechanical properties of wood during brown rot decay. Int Res Group Wood Preserv 2001:1-10.

Fast P, Gafner B, Jackson R, Li J (2016) Case study: An 18 storey tall mass timber hybrid student residence at the University of British Columbia, Vancouver. Page 9 in International Holzbau-Forum (IHF) 2016.

Fitzgerald D, Sinha A, Miller TH, Nairn JA (2020) Toe screwed cross-laminated timber connection design and nonlinear modeling. J Struct Eng 146(6):04020093.

Ganey R, Berman J, AkbasT, Loftus S, Dolan JD,Sause R, Ricles J, Pei S, van de Lindt JW, Blomgren H (2017) Experimental investigation of self-centering cross-laminated timber walls. J Struct Eng 143(10):04017135.

Gaylarde C, Ribas Silva M, Warscheid Th (2003) Microbial impact on building materials: An overview. Mater Struct 36(5):342-352.

Glass SV, Wang J, Easley S, Finch G (2013) Chapter 10: Enclosure–Building enclosure design for cross-laminated timber construction. Pages 1-55 in E Karacabeyli and B Douglas, eds. CLT handbook: Cross-laminated timber, Vol. 10 (Special Publication, ISSN 1925-0495; SP-529E). https://www.fs.usda.gov/treesearch/pubs/all/43846.

Hasburgh L, Bourne K, Ranger L, Dagenais C, Roy- Poirier A (2016a) Fire performance of mass-timber encapsulation methods and the effect of encapsulation on char rate of cross-laminated timber. Page 10 in World Conference on Timber Engineering, August 22-25,2016, Vienna, Austria.

Hasburgh L, Schiff S, Pang W, Peralta P, Mitchell P, Bourne K (2016b) Effect of adhesives and ply configuration on the fire performance of southern pine cross-laminated timber. Page 10 in World Conference on Timber Engineering, August 22-25, 2016, Vienna, Austria.

Kent SM, Leichti RJ, Rosowsky DV, Morrell JJ (2005) Effects of decay on the cyclic properties of nailed connections. J Mater Civ Eng 17(5):579-585.

Kent SM, Leichti RJ, Rosowsky DV, Morrell JJ (2007) Effects of wood decay by Postia placenta on the lateral capacity of nailed oriented strandboard sheathing and Douglas-fir framing members. Wood Fiber Sci 36(4):560-572.

Kippel M, Leyder C, Frangi A, Fontana M (2014) Fire tests on loaded cross-laminated timber wall and floor elements. Fire Saf Sci 11:626-639.

Kramer A, Barbosa AR, Sinha A (2014) Viability of hybrid poplar in ANSI approved cross-laminated timber applications. J Mater Civ Eng 26(7):06014009.

Kramer A, Barbosa AR, Sinha A (2016) Performance of steel energy dissipators connected to cross-laminated timber wall panels subjected to tension and cyclic loading. J Struct Eng 142(4):E4015013.

Krawinkler H, Parisi F, Ibarra L, Ayoub A, Medina R (2001) Development of a testing protocol for woodframe structures. 99 pp.

Kremer PD, Symmons MA (2015) Mass timber construction as an alternative to concrete and steel in the Australia building industry: A PESTEL evaluation of the potential. Int Wood Prod J 6(3):138-147.

Mahdavifar V, Barbosa AR, Sinha A, Muszynski L, Gupta R (2017) Hysteretic behaviour of metal connectors for hybrid (high- and low-grade mixed species) cross laminated timber. ArXiv:1710.07825 [Physics]. http://arxiv.org/abs/1710.07825.

Mahdavifar V, Barbosa AR, Sinha A, Muszynski L, Gupta R, Pryor SE (2019) Hysteretic response of metal connections on hybrid cross-laminated timber panels. J Struct Eng 145(1):04018237.

Mahr K, Sinha A, Barbosa AR (2020) Experimental investigation and modeling of thermal effects on a typical cross-laminated timber bracket shear connection. J Mater Civ Eng 32(6):04020111.

Mallo MFL, Espinoza O (2014) Outlook for cross-laminated timber in the United States. BioResources 9(4):7427-7443.

Mankowski M, Morrell JJ (2000) Patterns of fungal attack in wood-plastic composites following exposure in a soil block test. Wood Fiber Sci 32(3):340-345.

Miyamoto BT, Sinha A, Morrell I (2020) Connection performance of mass plywood panels. For Prod J 70(1):88-99.

Morrell JJ, Morrell I, Sinha A, Trebelhorn D (2018) Moisture intrusion in cross laminated timber and the potential for fungal attack. World Conference on Timber Engineering, August 20-23, 2018, Seoul, South Korea.

Pei S, van de Lindt JW, Barbosa AR, Berman JW, McDonnell E, Dolan JD, Blomgren H, Zimmerman RB, Huang D, Wichman S (2019) Experimental seismic response of a resilient 2-story mass-timber building with post tensioned rocking walls. J Struct Eng 145(11):04019120.

Pei S, van de Lindt JW, Popovski M, Berman JW, Dolan JD, Ricles J, Sause R, Blomgren H, Rammer DR (2016) Cross-laminated timber for seismic regions: Progress and challenges for research and implementation. J Struct Eng 142(4):E2514001.

Schmidt T, Blass HJ (2018) Recent development in CLT connections: Part II plane shear connections for CLT bracing elements under cycling loads. Wood Fiber Sci 50(Special Issue):58-67.

Schmidt EL, Riggio M, Barbosa AR, Mugabo I (2019) Environmental response of a CLT floor panel: Lessons for moisture management and monitoring of mass timber buildings. Build Environ 148:609-622.

Soti R, Sinha A, Morrell I, Miyamoto BT (2020) Response of self-centering mass plywood panel shear walls. Wood Fiber Sci 52(1):102-116.

Tannert T, Follesa M, Fragiacomo M, Gonzalez P, Isoda H, Moroder H, Xiong H, van de Lindt JW (2018) Seismic design of cross-laminated timber buildings. Wood Fiber Sci 50(special issue):3-26.

Tugce A, Sause R, Ricles J, Ganey R, Berman J, Loftus S, Dolan JD, Pei S, van de Lindt JW, Blomgren H (2017) Analytical and experimental lateral-load response of self centering post tensioned CLT walls. J Struct Eng 143(6):04017019.

van de Lindt JW, Furley J, Amini MO, Pei S, Tamagnone G, Barbosa AR, Rammer D, Line P, Fragiacomo M, Popovski M (2019) Experimental seismic behavior of a two-story CLT platform building. Eng Struct 183:408-422.

Wang JY, Stirling R, Morris PI, Taylor A, Lloyd J, Kirker G, Lebow S, Mankowski M, Barnes HM, Morrell JJ (2018) Durability of mass timber structures: A review of the biological risks. Wood Fiber Sci 50(Special Issue):110-127


Refbacks

  • There are currently no refbacks.