Chemithermomechanical Pulping Characteristics Of Budworm-Killed Trees

Authors

  • Zoltan Koran
  • Kibi Nlombi

Keywords:

Chemithermomechanical pulp, balsam-fir, spruce budworm, dead trees, paper strength, optical properties, burst index, breaking length, tear index, Canadian Standard Freeness, NaOH solubility

Abstract

Chemithermomechanical pulps (CTMP) were produced from balsam-fir trees [Abies balsamea (L.) Mill] that were harvested one and three years after they were killed by spruce budworm beetles. Laboratory tests revealed that the spruce budworm produced significant reductions in wood density (30%), fiber length (19%), long fiber fraction (36%), brightness (4%), tensile strength (25%), and burst strength (24%), but most significantly in the tear strength of paper (51%). However, these negative effects were accompanied by some positive results, e.g., a 15% decrease in the energy of refining, a 73% reduction in pulp rejects, coupled with a 108% increase in the fine content of the pulp and by a 5% increase in the opacity of paper. In order to profit from the above advantages and to prevent any further reduction in the quality of paper, the dead trees must be harvested within three years of their defoliation—the sooner, the better.

References

Atack, D., J. Fontebasso, and M. I. Stationwala. 1985. The characterization and grinding of budworm killed balsam-fir. Pulp Paper Sci. 11(1): 1-7.nFereshtehkhou, S. 1982. The properties of pulp and paper from spruce budworm-killed balsam-fir. M.Sc. thesis, Department of Forest Products, University of Minnesota, St. Paul, MN.nFereshtehkhou, S., R. D. Neuman, and S. A. Sinclair. 1985. Thermomechanical pulp properties of spruce budworm-killed balsam-fir. Pulp Paper Can. 86(4): 43-45.nImada, S. E., D. G. McVey, and D. A. Holder. 1983. Utilization of budworm balsam-fir in TMP. Conference on the utilization of spruce and fir. University of Maine, Orono, ME.nKoran, Z. 1968. Electron microscopy of tangential tracheid surfaces of black spruce produced by tensile failure at various temperatures. Svensk Papperstidn. 71(17): 567-576.nKoran, Z. 1970. Surface structure of TMP fibers studied by electron microscopy. Wood Fiber 2(3): 247-258.nKoran, Z. 1989. Different processes can be used to enhance hardwood pulping quality. Pulp Paper Can. 90(2): 18-20.nKoran, Z., A. Piché, and R. Bouchard. 1985. White birch TMP in newsprint manufacture. Pulp Paper Can. 86(10): 49-51.nRobitaille, J. M. 1985. Influence of dead wood in paper mill. Technical Report. Consolidated-Bathurst Newsprint, Port-Alfred, Québec, Canada.nSamuelson, L., P. J. Mjoberg, N. Hartler, L. Val-Lander, and K. E. Eriksson. 1980. Influence of fungal treatment on the strength versus energy relationship in mechanical pulping. Svensk Papperstidn. 83(8): 221-225.nTasman, J. E. 1972. The fiber length of Bauer-McNett screen fractions. Tappi 55(1): 136-138.nTombler, G., and R. E. Dines. 1985. Mechanical and chemimechanical pulping of budworm-killed balsam-fir for the manufacture of newsprint. Symposium on the economic utilization of dead trees. Fredericton, New Brunswick, Can. For. Serv., Ottawa, Ontario, Canada.n

Downloads

Published

2007-06-25

Issue

Number 4 / October 1994

Section

Research Contributions

License

The copyright of an article published in Wood and Fiber Science is transferred to the Society of Wood Science and Technology (for U. S. Government employees: to the extent transferable), effective if and when the article is accepted for publication. This transfer grants the Society of Wood Science and Technology permission to republish all or any part of the article in any form, e.g., reprints for sale, microfiche, proceedings, etc. However, the authors reserve the following as set forth in the Copyright Law:

1. All proprietary rights other than copyright, such as patent rights.

2. The right to grant or refuse permission to third parties to republish all or part of the article or translations thereof. In the case of whole articles, such third parties must obtain Society of Wood Science and Technology written permission as well. However, the Society may grant rights with respect to Journal issues as a whole.

3. The right to use all or part of this article in future works of their own, such as lectures, press releases, reviews, text books, or reprint books.