Effect of pH and Buffering Capacity of Wood on The Gelation Time of Urea-Formaldehyde Resin

Authors

  • William E. Johns
  • Khan A. Niazi

Keywords:

pH, buffering capacity, hardwoods, softwoods, urea-formaldehyde resin, gelation time

Abstract

The pH and buffering capacity for water extract of the heartwood and sapwood of ten hardwoods and nine softwoods were determined. pH values ranged from 4.00 to 5.86 for hardwood and 4.02 to 5.82 for softwood. The gelation time for a urea-formaldehyde resin as affected by wood flour for each wood was determined. Analysis shows that a strong correlation between gel time of wood flour and either pH or acid buffering capacity of water extract exists.

References

Campbell, W. G., and S. A. Bryant. 1941. Determination of pH in wood. Nature 147:357.nCrawford, R. J. 1968. Production experiences in large plant using several species for furnish. A description of the laboratory method used in measuring pH and buffer of wood. Proceedings of the Second Annual International Particleboard Symposium, pp. 129-138.nFoster, William G. 1967. Species variation. Proceedings of the First Annual Particleboard Symposium, pp. 13-22.nGray, V. R. 1958. The acidity of wood. J. Inst. Wood Sci. 1:58-64.nIngruber, O. V. 1958. The behavior of wood and wood constituents as acid-buffering systems. Pulp Paper Mag. Can. Nov 59:135-141.nLambuth, A. L. 1967. Procedure for determining the pH and buffering capacity of wood. Lab Test Method No. 142, Monsanto Company Seattle Research.nMaloney, T. M. 1977. Modern particleboard and dry-process fiberboard manufacturing. Miller Freeman Publications, San Francisco.nMoor, W. E., and D. B. Johnson. 1967. Procedures for the chemical analysis of wood and wood products, as used at the U.S. Forest Products Laboratory. Forest Products Laboratory, Forest Service, U.S. Department of Agriculture, Madison, Wisconsin.nNarayanamurti, D. 1957. Die Bedeutung der Holzextraktstoffe. Holz Roh-Werkst. 15:370.nPackman, D. F. 1960. The acidity of wood. Holzforschung 14(6):178-183.nRayner, C. A. A. 1965. Synthetic organic adhesives, pp. 186-352. In: Houwink, R. and G. Salomon eds. Adhesion and adhesives, Vol. 1. Elsevier Publishing Company, New York.nStamm, A. J. 1961. A comparison of three methods for determining the pH of wood and paper. For. Prod. J. 11(7):310-312.nStamm, A. J. 1964. Measurement of pH. Para. 10.1. Selective adsorption from solutions. Chapter 10. Wood and cellulose science. The Ronald Press Company, NY.nSteele, R. G. D., and. J. H. Torrie. 1960. Principles and procedures of statistics. McGraw Hill Book Company, NY.n

Downloads

Published

2007-06-27

Issue

Section

Research Contributions